Ventilation installation — supply and exhaust systems and recuperators
Fogged-up windows, mold in the bathroom corners, a stuffy bedroom in the morning — typical reasons to have ventilation installed. Describe your rooms in an order, and installers will send responses. Or choose one yourself — by photos of installed systems, service prices and client reviews.
Ventilation installers
How much ventilation installation costs
What affects the price
System type
A recuperator for one room means one hole in the wall, while a central supply and exhaust unit needs a network of ducts to every room.
Holes in the walls
Through-holes are cut with a diamond core drill, so the price of each depends on the wall material and thickness: concrete, brick or insulated aerated block.
Duct routing
Ducts are hidden above a suspended ceiling, in boxed-in enclosures or in the attic; if the attic is cold, they are also insulated so condensation does not form.
Renovation stage
Ventilation is easiest to install before the finish work. Once the renovation is done, ducts have to be hidden in boxed-in enclosures, or you make do with recuperators in individual rooms.
Work at height
If the outer grille has to be fitted from the facade on an upper floor, an industrial climber or a truck-mounted aerial lift may be needed — this is usually charged separately.
Prices come from specialists' profiles on Nexperity and update automatically. You agree the final price with the specialist directly.
How to find a ventilation installer
Two ways — pick the one that suits you
Pick a specialist yourself
- 1Open specialists' profiles and their work
- 2Send a request that describes the task
- 3Once accepted — contact the specialist directly
Post an order
- 1Describe the task, payment and the timing you want
- 2Receive responses from specialists
- 3Pick the best specialist and agree directly
- Free for clients
- Orders can be posted anonymously
- Your contacts open only after acceptance
- No commission on the deal
How to choose a ventilation installer
- 1
Airflow calculation
Ask to see the calculation: how much air the system will supply to each habitable room and how much it will extract from the kitchen, bathroom and toilet.
- 2
Noise and unit location
Ask where the unit will sit — under the hallway ceiling, in the attic or in a utility room — and how loud it will run in night mode.
- 3
Filter maintenance
The filters will need regular cleaning or replacing. Check how to reach them, whether the unit will have an access hatch and how often they need replacing in your model.
- 4
A hole in the facade
In an apartment building, find out in advance from the OSBB (condominium association) or the building manager whether the outer wall may be drilled and a grille fitted on the facade.
- 5
Setup after start-up
Agree that after the installation they will measure and adjust the airflow in each room and show you how to switch modes.
What to put in the order
Apartment, house or commercial space, the floor area and number of rooms
What you need: a whole-home system, a recuperator for one room, a bathroom fan or basement ventilation
Renovation stage: bare walls or a finished interior that must be preserved
Material and thickness of the outer walls, and where ducts can run: above a suspended ceiling, in the attic, in boxed-in enclosures
Whether there is a ventilation design, or the system has to be calculated from scratch
Whether the equipment is already bought — make and model of the recuperator or unit
Questions about Nexperity
How Nexperity works — separately for clients and for specialists
For clients
Nothing. Searching for specialists, sending requests, posting orders and receiving responses are free.
No. You agree the price and the payment method with the specialist and pay them directly. Nexperity does not take payments and is not a party to your deal.
A request goes to one specialist — from their profile. An order is posted for everyone: specialists send you responses, and you choose which one to accept.
How the specialist will do the task, a price — fixed, a range, hourly or “on request” — and, optionally, an estimated timeline.
30 days from publication: all that time it is visible in the feed and specialists can send responses. The exact end date and time are shown on the order in your account. From that moment the order is closed and a response can no longer be accepted. You can cancel it earlier, and if no specialist turned up, post a new one.
Yes: you can hide your name and photo in an order. The anonymity lasts until acceptance — the specialist whose response you accept sees your name and photo. The task description is public: anyone visiting the site can read it.
Only after acceptance — when you accept their response or they accept your request. And only the contacts you chose to show.
After acceptance you see the contacts the specialist chose to show, and they see the ones you chose. You can also message on Nexperity when the chat is on: on an order you decide that, on a direct request the specialist does.
Once the work is done, mark the order or the collaboration completed in your account — then you can say whether you recommend the specialist. A review can only be left for a collaboration that happened through Nexperity: one per specialist, which you can change or delete at any time.
For specialists
Nothing for now: this is the free period, and no subscription is needed yet. Nexperity takes no commission on deals — you settle with the client directly.
Sign up, fill in your specialist profile and add your services — each with a category, a description and a price. Once the profile is complete, it appears in search and on the category pages.
Two ways: clients send you requests from your profile, which you can accept or decline; and you see public orders in your categories in your account and can respond to them.
You describe how you will do the task and give a price and, optionally, a timeline. The client compares responses and accepts one.
Contacts set to “Public” are visible to everyone on your profile. A client sees contacts set to “After connection” once you accept their request or they accept your response. “Hidden” ones are not revealed in new connections: a contact already revealed to a client stays visible to them.
Each service has a fixed price, a range, an hourly rate or “on request”. Prices show on your profile and in search results, and you agree the final price with the client.
Through search and the category pages of your services. The order depends on your clients' reviews — how many of them recommend you — and in search also on how well your services match the query.
A photo, a description, your region and way of working — online or in person — your contacts and a portfolio: photos of your work, each with a short caption if you like.
A client leaves a review after completed work, and only for a collaboration through Nexperity: they say whether they recommend you and may add a few words. Each client counts once, however many times you work together.
Related categories
Air conditioning and HVAC
Air conditioner installation, cleaning and rechargingHeating work
Boilers, radiators, underfloor heating, gas water heaters, stovesCeiling work
Stretch, suspended and coffered ceilingsTurnkey renovation
Complete apartment or house renovation, from planning to handover
Other in Construction and repair
- Turnkey construction
- Finishing work
- Plumbing
- Electrical
- Windows and doors
- Roofing
- Insulation and facades
- Architecture
- Demolition
- Welding
- Masonry and paving
- Concrete and screed
- Carpentry and trim
- Custom furniture
- Landscaping and earthworks
- Fireplaces and stoves
- Fences and gates
- Waterproofing
- Stairs
- Metalworking
- Well drilling
- Pools and fountains
- High-altitude work
- Security systems
- Terraces and gazebos
- Debris removal
- Metal anti-corrosion
- Drainage and irrigation
- Geodesy and surveying
- Lathe work
Do you install ventilation?
Get orders from your category and respond to them — with no commission on deals.